Copper Recycling Center Wieland: Hours, Pay Rates & Drop-Off
Use this refreshed guide before contacting Wieland Recycling North America about copper scrap, electronic scrap, nonferrous metals, industrial residues, or scrap buy-back. It explains the verified Granite City location, business hours, goods acceptance window, pay-rate reality, documentation questions, material preparation, map directions, and when a normal local scrap yard may be a better fit.
Quick Answer: Wieland Recycling North America Hours, Address and Best First Step
Wieland Recycling North America is listed by Wieland at 2700 Missouri Avenue, Granite City, IL 62040. The official phone number is +1 (618) 877-0585. The official page lists general business hours as Monday–Friday, 7:30 a.m.–4:00 p.m. and goods acceptance times as Monday–Friday, 7:30 a.m.–2:00 p.m..
If you are bringing material, the goods acceptance window is the key detail. Do not plan around the 4:00 p.m. business closing time unless Wieland directly confirms your receiving instructions. For copper scrap, e-scrap, residues, large loads, business loads, or high-value material, call before loading.
Screenshot Guide: Official Hours and Goods Acceptance Times
The screenshot belongs here because it supports the most important action on the page: verifying the official Wieland location, phone number, business hours, and goods acceptance window before planning a drop-off or quote request.
Image description: This visual reference helps readers understand the difference between general business hours and the earlier goods acceptance window. Always verify directly with Wieland before driving because receiving rules, holiday closures, load requirements, and material acceptance can change.
On This Page
- Search intent and location confusion
- Business hours vs goods acceptance
- Copper pay rates and quote reality
- Official source and PDF details
- Accepted scrap categories
- What not to assume
- Before-you-bring checklist
- Copper grade questions
- Business and industrial loads
- What to do instead
- Call script
- Map and directions
- FAQ
Search Intent Audit: What Users Actually Need for “Wieland Copper Recycling Center”
Search results for this topic mix several different intents: Wieland Recycling North America, Wieland Metal Services scrap buy-back, Wieland metal information, Wieland Electric, Totall Metal Recycling history, and generic scrap yards. This page focuses on the Granite City recycling operation because that is the official location page with address, phone, business hours, and goods acceptance times.
The biggest user-risk is assuming that every Wieland result means the same thing. Wieland Electric is a different electrical connection technology business, the Wieland metal information page is not a public scrap payout table, and the scrap buy-back page is a program-contact page, not a guaranteed walk-in rate board.
Wieland Recycling Hours: Business Hours vs Goods Acceptance Times
The most important micro-detail is that Wieland lists two different time windows. General business hours are useful for office contact and phone communication. Goods acceptance times are the relevant window if you are delivering scrap or material for receiving.
| Detail | Officially Listed Information | What It Means Before You Drive |
|---|---|---|
| Facility name | Wieland Recycling North America | Use this exact name when calling, routing, or verifying the official page. |
| Address | 2700 Missouri Avenue, Granite City, IL 62040 | Confirm truck access, gate procedure, receiving entrance, and unloading instructions before arrival. |
| Phone | +1 (618) 877-0585 | Call before loading copper scrap, e-scrap, residues, or a high-value commercial load. |
| Business hours | Monday–Friday, 7:30 a.m.–4:00 p.m. | Useful for office contact, general questions, and business communication. |
| Goods acceptance | Monday–Friday, 7:30 a.m.–2:00 p.m. | This is the key window for receiving material. Plan around this earlier cutoff. |
| Weekend drop-off | No Saturday or Sunday hours are listed on the official location page. | Do not assume weekend drop-off unless Wieland directly confirms it. |
| Holiday schedule | No fixed public holiday calendar was verified for this page. | Call before hauling material near holidays, storms, plant shutdowns, or long weekends. |
Wieland Copper Pay Rates: Public Metal Prices vs Actual Scrap Quotes
The official Wieland Recycling North America location page does not publish a fixed copper scrap pay-rate table. The Wieland Metal Services scrap buy-back page confirms competitive scrap buy-back programs, but it does not show a public daily payout sheet for walk-in copper grades.
Wieland’s metal-information page may show metal values and reference prices, but a reference metal price is not the same as a guaranteed scrap payout. Scrap value can change by copper grade, insulation, alloy mix, contamination, moisture, quantity, freight, account terms, assay, and whether the material fits the receiving program.
| User Question | Safe Answer | Best Question to Ask Wieland |
|---|---|---|
| Does Wieland publish copper pay rates? | No fixed public copper scrap payout table was verified on the official location or buy-back page. | “Can you quote my exact copper grade, quantity, and material condition?” |
| Is the metal-information page a scrap payout sheet? | No. It can help users understand market context, but it should not be treated as a drop-off payout promise. | “How does today’s market price relate to my scrap quote?” |
| Will bare copper and insulated wire pay the same? | No safe assumption. Grade, insulation, contamination, and recovery value matter. | “Should I separate bare copper, insulated wire, tubing, and mixed material?” |
| Is payment immediate? | No instant-payment promise should be made from the public pages. | “What payment method, timing, account setup, and documents are required?” |
| Can businesses negotiate? | Industrial scrap often depends on volume, terms, logistics, and material review. | “Do you support long-term pricing, recurring pickup, or closed-loop buy-back?” |
Official Source and PDF Audit: What Was Added to Make This Page More Useful
The official Wieland location page gives the strongest action details: address, phone, business hours, and goods acceptance times. The worldwide page adds useful context by explaining that the Granite City recycling operation serves industrial clients and processes a broad mix of metals and recyclables.
Wieland’s official acquisition PDF about Totall Metal Recycling supports the Granite City context because it describes Totall Metal Recycling as based in Granite City and as processing a wide range of metal scrap and recyclables before integration into Wieland’s North American operations. This matters because users may still see old Totall references, older local listings, or mixed business names in search results.
Wieland’s white paper on brass recycling and machining economics discusses closed-loop scrap arrangements and negotiated rates. Although that paper is not a Granite City copper price sheet, it supports the practical point that industrial scrap economics can be negotiated and material-specific rather than a simple public posted-price model.
What Scrap Materials Wieland Recycling North America Says It Processes
Wieland’s official recycling information says the North America recycling operation processes about 100,000 tons of scrap per year, including copper scrap, electronic scrap, lead, tin, zinc, aluminum, nickel, cobalt, titanium, residues, and other recyclables. This is a broad industrial list, not a promise that every small household item will be accepted at the gate.
| Material Category | Examples a User May Have | What to Verify Before Delivery |
|---|---|---|
| Copper scrap | Bare bright copper, copper tubing, bus bar, clean copper solids, production scrap, wire, and copper-bearing residues. | Ask which copper grades are accepted, whether material should be sorted, and whether an appointment is required. |
| Insulated copper wire | Electrical wire, cable, building wire, harnesses, or industrial wire streams. | Ask whether it should be stripped, sorted by gauge, boxed, palletized, or quoted as insulated wire. |
| Electronic scrap | Data center equipment, circuit boards, servers, electronics, and recoverable metal-bearing e-scrap. | Ask about data destruction, chain of custody, batteries, accepted devices, and hazardous components. |
| Other nonferrous metals | Lead, tin, zinc, aluminum, nickel, cobalt, titanium, brass, alloys, and manufacturing scrap streams. | Ask for material specifications, contamination limits, packaging rules, and quote method. |
| Residues and mixed recyclables | Industrial residues, byproducts, mixed recoverable material, and processing scrap. | Ask whether testing, sampling, assay, safety data, or special handling is required. |
What Not to Assume About Wieland Copper Drop-Off
The old version of a page like this can become risky if it sounds like a normal public scrap yard with guaranteed cash prices. The safer answer is to separate what is verified from what must be confirmed.
Before You Bring Copper Scrap to Wieland: Practical Checklist
A clean, sorted, documented load is easier to review than a mixed pile. Better preparation can reduce delay, improve quote clarity, and prevent rejected-load problems.
- Call before loading. Confirm material type, quantity, goods acceptance window, appointment needs, vehicle access, documentation, and unloading rules.
- Separate material streams. Keep bare copper, insulated wire, copper tubing, brass, aluminum, e-scrap, residues, batteries, and trash separate.
- Remove obvious contamination. Keep fluids, dirt, concrete, wood, plastic, trash, and unsafe materials out of copper scrap where possible.
- Prepare photos and estimates. For a large load, be ready to describe material type, estimated weight, packaging, contamination, and source.
- Bring identification and source details. High-value copper can raise ownership questions. Have invoices, job documents, authorization, or business details ready.
- Arrive within goods acceptance time. Plan around the 7:30 a.m.–2:00 p.m. receiving window, not only the 4:00 p.m. business close.
- Do not mix hazardous materials. Batteries, chemicals, fluids, pressurized containers, asbestos, and unknown residues may need another route or special approval.
Copper Scrap Grade Questions to Ask Before You Request a Quote
Copper value depends heavily on grade and condition. A clean copper bus bar is different from insulated wire. Bare bright wire is different from e-scrap. Copper tubing with fittings is different from clean production scrap. Ask questions before assuming one copper rate applies to every copper-bearing material.
| Material Type | Value Factor | Question to Ask |
|---|---|---|
| Bare bright or clean copper solids | High copper content and low contamination usually matter. | “Do you buy this grade, and how should it be separated or packaged?” |
| Insulated copper wire | Insulation percentage, gauge, and recovery value can affect classification. | “Do you want it stripped, sorted by gauge, or sold as insulated wire?” |
| Copper tubing | Fittings, solder, oil, paint, and mixed metals can change classification. | “Should fittings or non-copper attachments be removed?” |
| Bus bar and industrial copper | Known alloy, cleanliness, source, and quantity can support better review. | “Do you need mill certs, photos, weights, purchase records, or source paperwork?” |
| E-scrap and data center equipment | Precious metals, data risk, batteries, boards, and mixed components matter. | “Do you provide data destruction, asset management, or chain-of-custody service?” |
| Residues or mixed industrial scrap | Assay, contamination, moisture, hazardous components, and recovery rate may matter. | “Is sampling, assay, or safety review required before a quote?” |
Business and Industrial Scrap Loads: What Companies Should Verify
Manufacturers, contractors, electrical companies, data centers, machine shops, demolition firms, and facility managers should treat Wieland as a business recycling conversation. Ask about account setup, recurring pickup, packing lists, freight, payment timing, material specifications, compliance, and whether the material should be delivered or handled through a buy-back program.
Business Seller Questions
- Do we need an account before delivery?
- Is an appointment required for goods acceptance?
- How should copper, brass, aluminum, e-scrap, and residues be separated?
- Do you require photos, packing lists, weights, assays, or purchase documents?
- What payment method and payment timing apply?
- Can you support recurring buy-back, closed-loop recycling, or long-term pricing?
Data Center and E-Scrap Questions
- Do you accept the specific asset type?
- Is secure data destruction available?
- Can you provide chain-of-custody documentation?
- How should batteries or hazardous components be separated?
- Do you handle pickup, freight, or on-site decommissioning?
What to Do Instead if Wieland Is Not the Right Fit
Not every copper-related load belongs at Wieland Recycling North America. Use this table to avoid wasting a trip or bringing material that needs another route.
| Situation | Why Wieland May Not Be the Best First Stop | Better Next Step |
|---|---|---|
| Small household copper load | The public Wieland pages describe industrial recycling and broad recycling services, not a guaranteed household counter. | Call Wieland first or use a local retail scrap yard that clearly accepts public drop-off. |
| Appliances with copper inside | Appliances may include refrigerants, oils, plastics, steel, compressors, or regulated components. | Use municipal bulky item service, appliance recycling, or a scrap yard that accepts appliances. |
| Mixed e-waste with batteries | Batteries and damaged electronics can create fire, shipping, and hazardous-material concerns. | Ask for e-scrap instructions or use a certified electronics recycler. |
| Questionable copper source | High-value copper can raise theft-prevention and ownership concerns. | Bring proof of ownership, job documentation, invoices, or authorization. |
| Hazardous or unknown residues | Residues may require sampling, special handling, or a different disposal route. | Call first and disclose the material honestly before transport. |
| Weekend drop-off need | No weekend hours are listed on the official Wieland location page. | Use a local scrap yard with verified Saturday hours or wait for the weekday goods acceptance window. |
Call-Before-You-Load Script for Wieland Copper Recycling
Use this script before loading copper scrap, especially if the material is valuable, mixed, commercial, heavy, or difficult to unload.
Simple Phone Script
“Hello, I’m calling about Wieland Recycling North America in Granite City. I have copper scrap / insulated copper wire / e-scrap / mixed nonferrous material. Can you confirm whether you are accepting this material today? What are the goods acceptance hours, documentation requirements, preparation rules, quote process, payment timing, and unloading instructions?”
Wieland Recycling North America Map and Directions
The map below points to the official Granite City address. Use it for route planning only. For receiving, payment, material acceptance, and unloading rules, verify directly with Wieland before driving.
Map note: Use the map for navigation, but do not use it as proof of today’s receiving status. Call Wieland before hauling a large load because receiving cutoff, holidays, access points, and material acceptance can change.
Frequently Asked Questions About Wieland Copper Recycling Center
What is the official Wieland Recycling North America address?
The official Wieland location page lists Wieland Recycling North America at 2700 Missouri Avenue, Granite City, IL 62040.
What are Wieland Recycling North America business hours?
The official page lists business hours as Monday through Friday from 7:30 a.m. to 4:00 p.m. Always verify before visiting because holidays and facility notices can change access.
What are Wieland goods acceptance times?
The official page lists goods acceptance times as Monday through Friday from 7:30 a.m. to 2:00 p.m. This is the key window for material receiving.
Is Wieland open Saturday or Sunday for copper drop-off?
No Saturday or Sunday hours are listed on the official Wieland Recycling North America location page. Do not assume weekend drop-off unless Wieland directly confirms it.
Does Wieland publish copper scrap pay rates online?
No fixed public copper scrap payout table was verified on the official Wieland Recycling North America location page or the Wieland scrap buy-back page. Ask Wieland for a current quote for your exact material.
Is Wieland’s metal information page the same as a scrap pay-rate sheet?
No. Metal market or reference values can help explain market context, but they are not a guaranteed payout for a scrap drop-off. Actual scrap quotes can depend on grade, contamination, quantity, logistics, assay, and account terms.
What scrap does Wieland Recycling North America process?
Wieland’s official recycling information mentions copper scrap, electronic scrap, lead, tin, zinc, aluminum, nickel, cobalt, titanium, residues, and other recyclables. Acceptance still needs confirmation for your specific load.
Can I bring household copper wire to Wieland?
Do not assume household walk-in acceptance. Wieland describes industrial recycling services, so call first. A local retail scrap yard may be a better fit for a small household load.
Should I strip copper wire before calling for a quote?
Do not assume stripping is required or beneficial. Ask how Wieland classifies your wire, whether it should remain insulated, and whether sorting by grade or gauge changes the quote.
Can Wieland handle electronics or data center scrap?
Wieland’s official recycling page mentions electronics recycling, data center decommissioning, secure data destruction, and asset management. Contact Wieland directly for accepted assets, documentation, and service scope.
What should I do if my scrap includes batteries, chemicals, fluids, or unknown residues?
Call before transporting it. Hazardous or unknown materials may need special handling, separation, testing, or a completely different disposal route.
Is Recycling-Centre.org the official Wieland website?
No. Recycling-Centre.org is an independent informational guide. Always verify hours, receiving times, accepted materials, pricing, and drop-off instructions with Wieland’s official website or phone number before visiting.
Final Summary: Best Way to Use Wieland for Copper Recycling
Wieland Recycling North America is officially listed at 2700 Missouri Avenue, Granite City, IL 62040. The key operating detail is that business hours are Monday–Friday, 7:30 a.m.–4:00 p.m., while goods acceptance is Monday–Friday, 7:30 a.m.–2:00 p.m. For material receiving, the earlier goods acceptance window matters most.
Do not rely on fake online copper rates. Wieland’s public pages confirm recycling and buy-back services, but a fixed Granite City copper payout table was not verified. Call first, describe the material clearly, ask about grading and payment, and verify whether your load is accepted before driving.